Our Products
SecureDigital Card

The Secure Digital Card is a further development of the MultiMedia Card with additional safety features. The SD Card has a write-protect switch and additionally offer cryptographically protective mechanisms for proprietary data.
Within the industrial environment the SD Card is an established standard and a future-proof media which according to the requirements is the object of continual further improvement.
The housing of the industrial standard SD Cards are completely welded and therefore they are insensitive against external Voltage influence.
Industrial Grade SD cards also work under extreme environmental and they are suitable for a wide range of applications.
APdate offers SD Cards from ATP, Delkin, InnoDisk and Smart Modular for every area of use. On request we also offer SD Cards from other producers.

  • Reliability, icrease in data integrity
  • Additional security features
  • High Data transfer rate
  • Automatic error correction
  • MLC or SLC Technology
  • Minimum space required
  • No moving parts
  • Non-volatile memory, data is not lost when power is turned off
  • Low power-consumption
  • 7-pin serial SPI interface
  • Simple controlling
  • 2,7V up to 3,6V power requirenment
  • 2,7V up to 3,6V power requirenment
  • ATP
    Industrie SLC SD card
  • Delkin
    Industrie SLC SD card
  • Delkin
    Industrie ELC SD card
  • InnoDisk
    Industrie SLC SD card
  • InnoDisk SLC
    Industrie SD card 3.0
  • Smart Modular SLC
    Industrie SD XL+ card
  • ATP Industrie
    aMLC SD card
  • ATP Industrie
    MLC SD card
  • Delkin Utility
    MLC SD card 3.0
  • InnoDisk MLC
    Industrie SD card 3.0
  • Smart Modular MLC
    Industrie SD XL card
Specification ATP Industrial SLC SD card
Dimension 32 x 24 x 2,1mm
Interface SD or SPI
Data transfer rate max 20MB/s Read¹
max. 19MB/s Write¹
Capacities 512MB, 1, 2, 4, 8, 16, 32GB
Flash Technology Single Level Cell (SLC)
SD (128, 256, 512MB, 1, 2GB) / SDHC (4, 8, 16, 32GB), / SD Spec. 2.0
Additional configuration Write protect switch
SIP Technology
Conformal Coating (optional)
CPRM Support
Flash Management ECC,
Static and dynamic Wear Leveling
Bad Block Management
AutoRefresh
Enhanced Power Cycling
Data integrity 5 years / 10 years(512MB, 1GB)
Voltage 2,7 - 3,6V
Power consumption Write: max. 69mA
Read: max. 43mA
Idle: max 1,1mA
Temperature range -40°C up to 85°C (Industrial Temp.)
MTBF >3 Mio. hours
Endurance (TBW) 12,3TB (512MB ) up to 768TB (32GB) written data (Sequential Write)
Warranty 5 years
Order information
on request
¹depends on capacity
Specification Delkin Industrial SLC SD card
Dimension 32 x 24 x 2,1mm
Interface SD or SPI
Data transfer rate SDHC Class 6
up to 24MB/s Sustained Read¹
up to 21MB/s Sustained Write¹
Capacities 128, 256, 512MB, 1, 2GB (SD)
4, 8, 16GB (SDHC)
Flash Technology Single Level Cell (SLC)
Additional configuration Write protect switch
Conformal Coating (optional)
Content Load (optional)
Customized Labels (optional)
Flash Management ECC,
Static and dynamic Wear Leveling,
Bad Block Management
Data integrity 10 years
Voltage 2,7 - 3,6V
Power consumption max. 75mA
Standby: 150µA
Temperature range -40°C up to 85°C (Industrial Temp)
MTBF >2 000 000 hours (Telcordia, 25°C)
Endurance (TBW) 7,3TB(128MB) up to 936TB (16GB) written data(Sequential Write)
Warranty 5 years
Order information
on request
¹ depends on capacity
Specification Delkin Industrial ELC (Extended Life Cycle) SD card
Dimension 32 x 24 x 2,1mm
Interface SD or SPI
Data transfer rate up to 24MB/s Sustained Read¹
up to 21MB/s Sustained Write¹
SDHC Class 6
Capacities 512MB, 1, 2GB
Flash Technology Single Level Cell (SLC)
Additional configuration Write protect switch
Conformal Coating (optional)
Content Load (optional)
Customized Labels (optional)
 long-term availability with constantBOM until 2021
Flash Management ECC,
Static and dynamic Wear Leveling,
Bad Block Management
Data integrity 10 years
Voltage 2,7 - 3,6V
Power consumption max. 75mA
Standby: 150µA
Temperature range -40°C up to 85°C (Industrial Temp)
MTBF >2 000 000 hors (Telcordia, 25°C)
Endurance (TWB) 7,3TB(128MB) up to 117TB (2GB) written data(Sequential Write)
Warranty 5 years
Order information
on request
¹depends on capacity
Specification InnoDisk Industrial SLC SD card
Dimension 32 x 24 x 2,1mm
Interface SD or SPI
Data transfer rate 128MB au to 2GB (Class 6)
up to 19MB/s Sustained Read¹
up to 12MB/s Sustained Write¹

4 up to 32GB (Clas 10)
up to 20MB/s Sustained Read¹
up to 16MB/s Sustained Write¹
Capacities 128, 256, 512MB, 1, 2, 4, 8, 16, 32GB
Flash Technology Single Level Cell (SLC)
SDHC (4, 8, 16, 32GB), / SD Spec. 2.0
Additional configuration Write protect switch
Conformal Coating (optional)
Flash Management ECC,
Static and dynamic Wear Leveling,
Bad Block Management
Enhanced Power Cycling
Data integrity 10 years
Voltage 2,7 - 3,6V
Power consumption Write: max. 60mA
Read: max. 40mA
Standby: 180µA
Temperature range 0°C up to 70°C (Standard Temp.)
-40°C up to 85°C (Industrie Temp.)
MTBF >4 Mio hours
Endurance (TWB) no information
Warranty 5 years
Order information
on request
¹depends on capacity
Specification InnoDisk SLC Industrial SD card 3.0
Dimension 32 x 24 x 2,1mm
Interface SD 3.0 and 2.0 or SPI
Data transfer rate 128MB (Class 4)
up to 23MB/s Sustained Read¹
up to 5MB/s Sustained Write¹

256MB (Class 6)
up to 23MB/s Sustained Read¹
up to 11MB/s Sustained Write¹

512MB up to 32GB (Clas 10)
up to 23MB/s Sustained Read¹
up to 21MB/s Sustained Write¹
Capacities 128, 256, 512MB, 1, 2, 4, 8, 16, 32GB
Flash Technology Single Level Cell (SLC)
SD Spec. 3.0
Additional configuration Write protect switch
Conformal Coating (optional)
Flash Management ECC,
Static and dynamic Wear Leveling
Bad Block Management
Garbage Collection
Enhanced Power Cycling
Data integrity 10 years
Voltage 2,7 - 3,6V
Power consumption Write: max. 69mA
Read: max. 43mA
Idle: max 1,1mA
Temperature range -20°C up to 85°C (Standard Temp.)
-40°C up to 85°C (Industrial Temp.)
MTBF >3 Mio hours
Endurance (TWB) 6,75TB(128MB) up to 1728TB (32GB) written data (Sequential Write)
Warranty 5 years
Order information
on request
¹depends on capacity
Specification Smart Modular SLC Industrial SD XL+ card
Dimension 32 x 24 x 2,1mm
Interface SD or SPI
Data transfer rate up to 24MB/s (512MB up to 2GB) and up to 98MB/s (4GB up to 32GB Sustained Read¹)
bis zu 20MB/s (512MB up to 2GB) and up to 70MB/s (4GB up to 32GB Sustained Write¹)
SDHC Class 6
Capacities 512MB, 1, 2, 4, 8, 16, 32GB
(64 and 128GB in MLC version possible)
Flash Technology Single Level Cell (SLC)
Additional configuration Write protect switch
Conformal Coating (optional)
Pass word protection(optional)
CPRM Support
Flash Management ECC,
Static and dynamic Wear Leveling
Bad Block Management
Power Loss Protection
Data integrity 10 years
Voltage 2,7 - 3,6V
Power consumption max. 160mA (3,6V)
Standby max: 270µA
Temperature range 0°C up to 70°C (Standard Temp.)
-40°C up to 85°C (Industrial Temp.)
MTBF >1 000 000 hours (Telcordia, 25°C)
Endurance (TWB) 3TB(512MB) up to 32TB (32GB) written data (Sequential Write)
Warranty 1 year
Order information
on request
¹depends on capacity
Specification ATP Industrial aMLC SD card
Dimension 32 x 24 x 2,1mm
Interface SD 3.0 (USH-1 Mode) or SPI
Data transfer rate up to 74MB/s Sustained Read¹
up to 27MB/s Sustained Write¹
Capacities 4, 8GB
Flash Technology enhanced Multi Level Cell (aMLC)
SDHC / SD Spec. 3.0
Additional configuration Write protect switch
SIP Technology
Conformal Coating (optional)
CPRM Support
Flash Management ECC,
Static and dynamic Wear Leveling
Bad Block Management
AutoRefresh
Enhanced Power Cycling
Data integrity 5 years
Voltage 2,7 - 3,6V
Power consumption Operating: max. 400 (UHS-1 Mode) respectively 800mA (UHS104 Mode)
Standby: max. 0,1A
Temperature range -25°C up to 85°C (Standard Temp.)
MTBF >3 Mio hours
Endurance (TWB) 64TB (4GB ) up to 128TB (8GB) written data(Sequential Write)
Warranty 2 years
Order information
on request
¹depends on capacity
Specification ATP Industrial MLC SD card
Dimension 32 x 24 x 2,1mm
Interface SD 3.0 (USH-1 Mode) or SPI
Data transfer rate up to 91MB/s Sustained Read¹
up to 58MB/s Sustained Write¹
Capacities 8, 16, 32, 64, 128GB
Flash Technology Multi Level Cell (MLC)
Additional configuration Write protect switch
SIP Technology
Conformal Coating (optional)
CPRM Support
Flash Management ECC,
Static and dynamic Wear Leveling
Bad Block Management
AutoRefresh
Enhanced Power Cycling
Data integrity 5 years
Voltage 2,7 - 3,6V
Power consumption Write: max. 69mA
Read: max. 43mA
Idle: max 1,1mA
Temperature range -25°C au to 85°C (Standard Temp.)
MTBF >3 Mio hours
Endurance (TWB) 9,5TB (8GB ) up to 153TB (128GB) written data(Sequential Write)
Warranty 2 years
Order information
auf Anforderung
¹depends on capacity
Specification Delkin Utility MLC SD card 3.0
Dimension 32 x 24 x 2,1mm
Interface SD 3.0 (USH-1 Mode) or SPI
Data transfer rate up to 90MB/s Sustained Read¹
up to 80MB/s Sustained Write¹
Capacities 4, 8, 16, 32, 64, 128GB
Flash Technology Enhanced Multi Level Cell (pseudoSLC)
SDHC / SCXC Spec. 3.0
Additional configuration Write protect switch
Conformal Coating (optional)
CPRM Support
Pass word protection (optional)
Flash Management ECC,
Static and dynamic Wear Leveling
Bad Block Management
S.M.A.R.T.
Auto-Read Refresh
Data Clone System
Embedded Mode (Linux, customized OS)
Data integrity 5 years
Voltage 2,7 - 3,6V
Power consumption max. 400mA
Temperature range -20°C up to 85°C (Standard Temp.)
MTBF >3 Mio hours
Endurance (TWB) no information
Warranty 3 year
Order information
on request
¹depends on capacity
Specification InnoDisk MLC Industrial SD card 3.0
Dimension 32 x 24 x 2,1mm
Interface SD 3.0 and 2.0 or SPI
Data transfer rate up to 45MB/s Sustained Read¹
up to 21MB/s Sustained Write¹
SDHC Class 10
Capacities 4, 8, 16, 32, 64GB
Flash Technology Multi Level Cell (MLC)
SDHC / SDXC Spec. 3.0
Additional configuration Write protect switch
Conformal Coating (optional)
Flash Management ECC,
Static and dynamic Wear Leveling
Bad Block Management
S.M.A.R.T.
Garbage Collection
Power Failure Management
Data integrity no information
Voltage 2,7 - 3,6V
Power consumption Write: max. 77mA
Read: max. 69mA
Idle: 160µA
Temperature range -20°C up to 85°C (Standard Temp.)
-40°C up to 85°C (Industrial Temp.)
MTBF >3 Mio hours
Endurance (TWB) 10,8TB (4GB) up to 172,8TB (64GB) written data (Sequential Write)
Warranty 3 years
Order information
on request
¹depends on capacity
Specification Smart Modular MLC Industrial SD XL card
Dimension 32 x 24 x 2,1mm
Interface SD or SPI
Data transfer rate up to 100MB/s Sustained Read¹
up to 74MB/s Sustained Write¹
SDHC Class 6
Capacities 4, 8, 16, 32, 64, 128GB
Flash Technology Multi Level Cell (MLC)
SDHC / SDXC Spec. 2.0
Additional configuration Write protect switch
Conformal Coating (optional)
Pass word protection (optional)
CPRM Support
Flash Management ECC,
Static and dynamic Wear Leveling
Bad Block Management
Power Loss Protection
Data integrity 10 years
Voltage 2,7 - 3,6V
Power consumption max. 163mA (3,6V)
Standby: 156µA
Temperature range 0°C up to 70°C (Standard Temp.)
-40°C up to 85°C (Industrie Temp.)
MTBF >1 000 000 hours (Telcordia, 25°C)
Endurance (TWB) 3,5TB(4GB) up to 118TB (128GB) written data (Sequential Write)
Warranty 1 year
Order information
on request
¹depends on capacity

Technical details are subject to change without prior notice