Our Products

SATADOM SATA III

The SATADOM Flash Memory Modul is a fast boot- and memory device with a very compact design. SATADOM is equipped with a 7-pin Standard Micro SATA II interface and can be connected to every SATA interface without mechanical problems. The selection of different designs enables the integration in design with little space. Unlike to many other SATA memory devices SATADOM has its own internal power supply and therefore no external cable is required (power supply via Pin 7 - on some versions also via Pin 8 - of the SATA connector).
SATADOM is compatible to all popular operating sytems and is an advisable memory device for most different aplications like Industral PC's, Embedded Systems, Gambling machines, POS, Medical technology and automation.
Depending on design and Flash configuration the SATADOM is available with capacities from 1GB up to 256GB.

  • 1, 2, 4, 8, 16, 32, 64GB SLC NAND Flash memory or
  • 8, 16, 32, 64GB Enhanced MLC (iSLC) NAND Flash memory or
  • 4, 8, 16, 32, 64, 128, 256GB MLC NAND Flash memory
  • No moving parts
  • Patented Power Pin Design
  • Extremely compact design
  • Standard SATA III Interface
  • Various designs
  • ECC Defect Management
  • Wear Leveling
  • Garbage Collection
  • S.M.A.R.T. Support
  • Shock- and vibrations resistant
  • Low power consumption
  • SATADOM-ML 3SE
  • SATADOM-ML 3SE-P
  • SATADOM-ML 3ME3
  • SATADOM-ML 3MG-P
  • SATADOM-MV 3SE
  • SATADOM-MV 3IE
  • SATADOM-MV 3ME3
  • SATADOM-MH 3SE
  • SATADOM-MH 3IE
  • SATADOM-MH 3ME3
  • SATADOM-SH 3SE
  • SATADOM-SH 3IE3
  • SATADOM-SH 3ME3
  • SATADOM-SL 3SE
  • SATADOM-SL 3IE3
  • SATADOM-SL 3ME3
  • SATADOM-SV 3SE
  • SATADOM-SV 3IE3
  • SATADOM-SV 3ME3
Specification InnoDisk SATADOM-ML 3SE
Dimension 35.5 x 30 x 9.5mm
Solid State SLC NAND Flash
no moving parts
Interface Serial ATA III
Design vertical, low-profile, straight connector
Connector Standard 7-pin SATA
Transfer Modes SATA I (1,5Gb/s) ,SATA II (3,0Gb/s) and SATA III (6Gb/s) support
Data transfer rate up to 490MB/s Sustained Read and
260MB/s Sustained Write (depending on capacity)
I/O Performance k.A.
Software no driver Software are required
Additional configuration Write protection switch
Temperature sensor (only Industial Temp.)
Conformal Coating (optional)
Flash Management ECC,
Wear Leveling,
Bad Block Management
Garbage Collection,
S.M.A.R.T Support
Power Management
iData Guard
ATA Security Support
Data integrity 10 years
Voltage 5VDC +/- 5%
additional cable or VCC via Pin 7 possible
Stromverbrauch max. 400mA (Sustained Write)
Kapazität 8, 16, 32, 64GB
Temperature range (operating) 0°C up to 70°C Standard Temperature range
-40°C up to +85°C Industrial Temperature range
MTBF >3 000 000 hours (Telcordia, 25°C)
Life cycle (TBW) 432TB (8GB) up to 3456TB (64GB) written Data (Sequential)
Warranty 5 years
Order information InnoDisk SATADOM-ML 3SE
on request
Specification InnoDisk SATADOM-ML 3SE-P
Dimension 35.5 x 30 x 9.5mm
Solid State SLC NAND Flash
no moving parts
Interface Serial ATA III
Design vertical, straight connector
Connector Standard 7-pin SATA
Transfer Modes SATA I (1,5Gb/s) ,SATA II (3,0Gb/s) and SATA III (6Gb/s) support
Data transfer rate up to 480MB/s Sustained Read and
240MB/s Sustained Write (depending on capacity)
I/O Performance k.A.
Software no driver software are required
Additional configuration Write protection switch
Temperature sensor (only Industial Temp.)
Conformal Coating (optional)
Flash Management ECC,
Wear Leveling,
Bad Block Management
Garbage Collection,
S.M.A.R.T Support
Power Management
iData Guard
ATA Security Support
TRIMM Support
DRAM Buffer
Data integrity 10 years
Voltage 5VDC +/- 5%
additional cable or VCC via Pin 7 possible
Power consumption max. 400mA (Sustained Write)
Capacity 8, 16, 32, 64GB
Temperature range (operating) 0°C up to 70°C Standard Temperature range
-40°C up to +85°C Industrial Temperature range
MTBF >3 000 000 hours (Telcordia, 25°C)
Life cycle (TBW) 432TB (8GB) up to3456TB (64GB) written Data (Sequential)
Warranty 5 years
Order information InnoDisk SATADOM-ML 3SE-P
on request
Specification InnoDisk SATADOM-ML 3ME3
Dimension 35.5 x 30 x 9.5mm
Solid State MLC NAND Flash
no moving parts
Interface Serial ATA III
Design vertical, low-profile, straight connector
Connector Standard 7-pin SATA
Transfer Modes SATA I (1,5Gb/s) ,SATA II (3,0Gb/s) and SATA III (6Gb/s) support
Data transfer rate up to 400MB/s Sustained Read and
140MB/s Sustained Write(depending on capacity)
I/O Performance up to 10200 IOPS Random Read and
up to 23000 IOPS Randow Write (4KB)
Software no driver software are required
Additional configuration Write protection switch
Temperature sensor (only Industial Temp.)
Conformal Coating (optional)
Flash Management ECC,
Wear Leveling,
Bad Block Management
Garbage Collection,
S.M.A.R.T Support
Power Management
iData Guard
ATA Security Support
Voltage 5VDC +/- 5%
additional cable or VCC via Pin 7 possible
Power consumption max. 400mA (Sustained Write)
Capacity 16, 32, 64, 128GB
Temperature range (operating) 0°C up to 70°C Standard Temperature range
-40°C up to +85°C Industrial Temperature range
MTBF >3 000 000 hours (Telcordia, 25°C)
Life cycle (TBW) 4,64TB (16GB) up to 74,24TB (256GB) written data (JEDEC 218)
Warranty 2 years
Order information InnoDisk SATADOM-ML 3ME3
on request
Specification InnoDisk SATADOM-ML 3MG-P
Dimension 35.5 x 30 x 9.5mm
Solid State MLC NAND Flash
no moving parts
Interface Serial ATA III
Design vertical, low-profile, straight connector
Connector Standard 7-pin SATA
Transfer Modes SATA I (1,5Gb/s) ,SATA II (3,0Gb/s) and SATA III (6Gb/s) support
Data transfer rate up to 480MB/s Sustained Read and
160MB/s Sustained Write (depending on capacity)
I/O Performance k.A.
Software no driver software are required
Additional configuration Write protection switch
Temperature sensor (only Industial Temp.)
Conformal Coating (optional)
Flash Management ECC,
Wear Leveling,
Bad Block Management
Garbage Collection,
S.M.A.R.T Support
Power Management
iData Guard
ATA Security Support
TRIM Support
DRAM Buffer
Voltage 5VDC +/- 5%
additional cable or VCC via Pin 7 possible
Power consumption max. 400mA (Sustained Write)
Capacity 16, 32, 64, 128GB
Temperature range (operating) 0°C up to 70°C Standard Temperature range
MTBF >3 000 000 hours (Telcordia, 25°C)
Life cycle (TBW) 43,2TB (16GB) up to 345,6TB (128GB) written data (Sequential)
Warranty 2 years
Order information InnoDisk SATADOM-ML 3MG-P
on request
Specification InnoDisk SATADOM-MV 3SE
Dimension 25.2 x 41.5 x 6.8mm
Solid State SLC NAND Flash
no moving parts
Interface Serial ATA III
Design vertical, high-profile, straight connector
Connector Standard 7-pin SATA
Transfer Modes SATA I (1,5Gb/s) ,SATA II (3,0Gb/s) and SATA III (6Gb/s) support
Data transfer rate up to 130MB/s Sustained Read and
120MB/s Sustained Write (depending on capacity)
I/O Performance k.A.
Software no driver software are required
Additional configuration Write protection switch
Temperature sensor (only Industial Temp.)
Conformal Coating (optional)
Flash Management ECC,
Wear Leveling,
Bad Block Management
Garbage Collection,
S.M.A.R.T Support
Power Management
iData Guard
ATA Security Support
Data integrity 10 years
Voltage 5VDC +/- 5%
additional cable or VCC via Pin 7 possible
Power consumption max. 200mA (Sustained Write)
Capacity 4, 8, 16, 32, 64GB
Temperature range (operating) 0°C up to 70°C Standard Temperature range
-40°C up to +85°C Industrial Temperature range
MTBF >3 000 000 hours (Telcordia, 25°C)
Life cycle (TBW) 216TB (4GB) up to 3456TB (64GB) written data (Sequential)
Warranty 5 years
Order information InnoDisk SATADOM-MV 3SE
on request
Specification InnoDisk SATADOM-MV 3IE
Dimension 25.2 x 41.5 x 6.8mm
Solid State Enhanced MLC (iSLC) NAND Flash
no moving parts
Interface Serial ATA III
Design vertical, high-profile, straight connector
Connector Standard 7-pin SATA
Transfer Modes SATA I (1,5Gb/s) ,SATA II (3,0Gb/s) and SATA III (6Gb/s) support
Data transfer rate up to 460MB/s Sustained Read and
370MB/s Sustained Write (depending on capacity)
I/O Performance k.A.
Software no driver software are required
Additional configuration Write protection switch
Temperature sensor (only Industial Temp.)
Conformal Coating (optional)
Flash Management ECC,
Wear Leveling,
Bad Block Management
Garbage Collection,
S.M.A.R.T Support
Power Management
iData Guard
ATA Security Support
Voltage 5VDC +/- 5%
additional cable or VCC via Pin 7 possible
Power consumption max. 200mA (Sustained Write)
Capacity 8, 16, 32, 64GB
Temperature range (operating) 0°C up to 70°C Standard Temperature range
-40°C up to +85°C Industrial Temperature range
MTBF >3 000 000 hours (Telcordia, 25°C)
Life cycle (TBW) 216TB (8GB) up to 1728TB (64GB) written data (Sequential)
Warranty 5 years
Order information InnoDisk SATADOM-MV 3IE
on request
Specification InnoDisk SATADOM-MV 3ME3
Dimension 25.2 x 41.5 x 6.8mm
Solid State MLC NAND Flash
no moving parts
Interface Serial ATA III
Design vertical, high-profile, straight connector
Connector Standard 7-pin SATA
Transfer Modes SATA I (1,5Gb/s) ,SATA II (3,0Gb/s) and SATA III (6Gb/s)support
Data transfer rate up to 220MB/s Sustained Read and
80MB/s Sustained Write(depending on capacity)
I/O Performance up to 7600 IOPS Random Read and
up to 15300 IOPS Randow Write (4KB)
Software no driver software are required
Additional configuration Write protection switch
Temperature sensor (only Industial Temp.)
Conformal Coating (optional)
Flash Management ECC,
Wear Leveling,
Bad Block Management
Garbage Collection,
S.M.A.R.T Support
Power Management
iData Guard
ATA Security Support
Voltage 5VDC +/- 5%
additional cable or VCC via Pin 7 possible
Power consumption max. 370mA (Sustained Write)
Capacity 8, 16, 32, 64, 128GB
Temperature range (operating) 0°C up to 70°C Standard Temperature range
-40°C up to +85°C Industrial Temperature range
MTBF >3 000 000 hours (Telcordia, 25°C)
Life cycle (TBW) 2,32TB (8GB) bis 37,12TB (128GB) geschriebene Daten (JEDEC 218)
Warranty 2 years
Order information InnoDisk SATADOM-MV 3ME3
on request
Specification InnoDisk SATADOM-MH 3SE
Dimension 30 x 40 x 12.30mm
Solid State SLC NAND Flash
no moving parts
Interface Serial ATA III
Design horizontal, angled connector
Connector Standard 7-pin SATA
Transfer Modes SATA I (1,5Gb/s) ,SATA II (3,0Gb/s) and SATA III (6Gb/s) support
Data transfer rate up to 260MB/s Sustained Read and
130MB/s Sustained Write (depends on capacity)
I/O Performance no information
Software no driver software are required
Additional configuration Write protection switch
Temperature sensor (only Industial Temp.)
Conformal Coating (optional)
Flash Management ECC,
Wear Leveling,
Bad Block Management
Garbage Collection,
S.M.A.R.T Support
Power Management
iData Guard
ATA Security Support
Data integrity 10 years
Voltage 5VDC +/- 5%
additional cable or VCC via Pin 7 possible
Power consumption max. 360mA (Sustained Write)
Capacity 4, 8, 16, 32GB
Temperature range(operating) 0°C up to 70°C Standard Temperature range
-40°C up to +85°C Industrial Temperature range
MTBF >3 000 000 hours (Telcordia, 25°C)
Life time (TBW) 216TB (4GB) up to 1728TB (32GB) written Data (Sequential)
Warranty 5 years
Order information InnoDisk SATADOM-MH 3SE (Examples)
on request
Specification InnoDisk SATADOM-MH 3IE
Dimension 30 x 40 x 12.30mm
Solid State Enhanced MLC (iSLC) NAND Flash
no moving parts
Interface Serial ATA III
Design horizontal, angled connector
Connector Standard 7-pin SATA
Transfer Modes SATA I (1,5Gb/s) ,SATA II (3,0Gb/s) and SATA III (6Gb/s) support
Data transfer rate up to 300MB/s Sustained Read and
190MB/s Sustained Write (depends on capacity)
I/O Performance no information
Software no driver software are required
Additional configuration Temperature sensor (only Industial Temp.)
Conformal Coating (optional)
Flash Management ECC,
Wear Leveling,
Bad Block Management
Garbage Collection,
S.M.A.R.T Support
Power Management
iData Guard
ATA Security Support
Voltage 5VDC +/- 5%
additional cable or VCC via Pin 7 possible
Power consumption max. 200mA (Sustained Write)
Capacity 8, 16, 32, 64GB
Temperature range (operating) 0°C up to 70°C Standard Temperature range
-40°C up to +85°C Industrial Temperatur range
MTBF >3 000 000 hours (Telcordia, 25°C)
Life time (TBW) 144TB (8GB) up to 1134TB (64GB) written Data (Sequential)
Warranty 5 years
Order information InnoDisk SATADOM-MH 3IE
on request
Specification InnoDisk SATADOM-MH 3ME3
Dimension 30 x 40 x 12.30mm
Solid State MLC NAND Flash
no moving parts
Interface Serial ATA III
Desing horizontal, angled connector
Connector Standard 7-pin SATA
Transfer Modes SATA I (1,5Gb/s) ,SATA II (3,0Gb/s) and SATA III (6Gb/s) support
Data transfer rate up to 220MB/s Sustained Read and
130MB/s Sustained Write (depends on capacity)
I/O Performance up to 8100 IOPS Random Read and
up to 22000 IOPS Randow Write (4KB)
Software no driver software are required
Additional configuration Write protection switch
Temperature sensor (only Industrial Temp.)
Conformal Coating (optional)
Flash Management ECC,
Wear Leveling,
Bad Block Management
Garbage Collection,
S.M.A.R.T Support
Power Management
iData Guard
ATA Security Support
Voltage 5VDC +/- 5%
additional cable or VCC via Pin 7 possible
Power consumption max. 400mA (Sustained Write)
Capacity 8, 16, 32, 64, 128GB
Temperature range (operating) 0°C up to 70°C Standard Temperature range
-40°C up to +85°C Industrial Temperature range
MTBF >3 000 000 hours (Telcordia, 25°C)
Life time (TBW) 2,32TB (8GB) up to 37,12TB (128GB) written Data (JEDEC 218)
Warranty 2 years
Order information InnoDisk SATADOM-MH 3ME3
on request
Specification InnoDisk SATADOM-SH 3SE
Dimension 18.0 x 30,3 x 12,5mm
Solid State SLC NAND Flash
no moving parts
Interface Serial ATA III
Design horizontal, angled connector
Connector Standard 7-pin SATA
Transfer Modes SATA I (1,5Gb/s) ,SATA II (3,0Gb/s) and SATA III (6Gb/s) support
Data transfer rate up to 300MB/s Sustained Read and
130MB/s Sustained Write (depending on capacity)
I/O performance no information
Software no driver software are required
Additional configuration Temperature sensor (only Industrial Temp.)
Conformal Coating (optional)
Flash Management ECC,
Wear Leveling,
Bad Block Management
Garbage Collection,
S.M.A.R.T Support
Power Management
iData Guard
ATA Security Support
Voltage 5VDC +/- 5%
additional cable or VCC via Pin 7 possible
Power consumption max. 130mA (Sustained Write)
Capacities 1, 2, 4, 8, 16, 32GB
Temperature range (operating) 0°C up to 70°C Standard Temperature range
-40°C up to +85°C Industrial Temperature range
MTBF >3 000 000 hours (Telcordia, 25°C)
Life cycle (TBW) 54TB (1GB) up to 1728TB (32GB) written Data (Sequential)
Warranty 5 years
Order information InnoDisk SATADOM-SH 3SE
on request
Specification InnoDisk SATADOM-SH 3IE3
Dimension 18.0 x 30,3 x 15,15mm
Solid State Enhanced MLC (iSLC) NAND Flash
no moving parts
Interface Serial ATA III
Design horizontal, angled connector
Connector Standard 7-pin SATA
Transfer Modes SATA I (1,5Gb/s) ,SATA II (3,0Gb/s) and SATA III (6Gb/s) support
Data transfer rate up to 240MB/s Sustained Read and
160MB/s Sustained Write (depends on capacity)
I/O Performance up to 9600 IOPS Random Read and
up to 24800 IOPS Randow Write (4KB)
Software no driver software are required
Additional configuration Temperature sensor (only Industrial Temp.)
Conformal Coating (optional)
Flash Management ECC,
Wear Leveling,
Bad Block Management
Garbage Collection,
S.M.A.R.T Support
Power Management
iData Guard
iData Guard
ATA Security Support
Voltage 5VDC +/- 5%
additional cable or VCC via Pin 7 or Pin 8 possible
Power consumption max. 290mA (Sustained Write)
Capacities 8, 16, 32, 64GB
Temperature range (operating) 0°C up to 70°C Standard Temperature range
-40°C up to +85°C Industrial Temperature range
MTBF >3 000 000 hours (Telcordia, 25°C)
Life cycle (TBW) 15,46TB (8GB) up to 123,73TB (64GB) written Data (JEDEC 218)
Warranty 5 years
Order information InnoDisk SATADOM-SH 3IE3
on request
Specification InnoDisk SATADOM-SH 3ME3
Dimension 18.0 x 30,3 x 15,5mm
Solid State MLC NAND Flash
no moving parts
Interface Serial ATA III
Design horizontal, angled connector
Connector Standard 7-pin SATA
Transfer Modes SATA I (1,5Gb/s) ,SATA II (3,0Gb/s) and SATA III (6Gb/s) support
Data transfer rate up to 210MB/s Sustained Read and
80MB/s Sustained Write (depending on capacity)
I/O Performance up to 7100 IOPS Random Read and
up to 13300 IOPS Randow Write (4KB)
Software no driver software are required
Additional configuration Temperature sensor (only Industrial Temp.)
Conformal Coating (optional)
Flash Management ECC,
Wear Leveling,
Bad Block Management
Garbage Collection,
S.M.A.R.T Support
Power Management
iData Guard
ATA Security Support
Voltage 5VDC +/- 5%
additional cable or VCC via Pin 7 or via Pin 8 possible
Power consumption max. 125mA (Sustained Write)
Capacity 8, 16, 32, 64, 128GB
Temperature range (operating) 0°C up to 70°C Standard Temperature range
-40°C up to +85°C Industrial Temperature range
MTBF >3 000 000 hours (Telcordia, 25°C)
Life cycle (TBW) 2,32TB (8GB) up to 37,12TB (32GB) written data (JEDEC 218)
Warranty 2 years
Order information InnoDisk SATADOM-SH 3ME3 (examples)
on request
Specification InnoDisk SATADOM-SL 3SE
Dimension 32.9 x 29,5 x 8mm
Solid State SLC NAND Flash
no moving parts
Interface Serial ATA III
Design vertical, low-profile, straight connector
Connector Standard 7-pin SATA
Transfer Modes SATA I (1,5Gb/s) ,SATA II (3,0Gb/s) and SATA III (6Gb/s) support
Data transfer rate up to 300MB/s Sustained Read and
130MB/s Sustained Write (depending on capacity)
I/O Performance no information
Software no driver software are required
Additional configuration Write protection switch
Temperature sensor (only Industial Temp.)
Conformal Coating (optional)
Flash Management ECC,
Wear Leveling,
Bad Block Management
Garbage Collection,
S.M.A.R.T Support
Power Management
iData Guard
ATA Security Support
Data integrity 10 years
Voltage 5VDC +/- 5%
additional cable or VCC via Pin 7 possible
Power consumption max. 130mA (Sustained Write)
Capacity 1, 2, 4, 8, 16, 32GB
Temperature range (operating) 0°C up to 70°C Standard Temperature range
-40°C up to +85°C Industrial Temperature range
MTBF >3 000 000 hours (Telcordia, 25°C)
Life cycle (TBW) 54TB (1GB) up to 1728TB (32GB) written data (Sequential)
Warranty 5 years
Order linformation InnoDisk SATADOM-SL 3SE
on request
Specification InnoDisk SATADOM-SL 3IE3
Dimension 30,0 x 28,4 x 7,4mm
Solid State Enhanced MLC (iSLC) NAND Flash
no moving parts
Interface Serial ATA III
Design horizontal, angled connector
Connector Standard 7-pin SATA
Transfer Modes SATA I (1,5Gb/s) ,SATA II (3,0Gb/s) and SATA III (6Gb/s) support
Data transfer rate up to 240MB/s Sustained Read and
160MB/s Sustained Write (depends on capacity)
I/O Performance up to 9600 IOPS Random Read and
up to 24800 IOPS Randow Write (4KB)
Software no driver software are required
Additional configuration Temperatursensor (only Industrial Temp.)
Conformal Coating (optional)
Flash Management ECC,
Wear Leveling,
Bad Block Management
Garbage Collection,
S.M.A.R.T Support
Power Management
iData Guard
ATA Security Support
Voltage 5VDC +/- 5%
additional cable or VCC via Pin 7 or via Pin 8 possible
Power consumption max. 173mA (Sustained Write)
Capacities 8, 16, 32, 64GB
Temperature range (operating) 0°C up to 70°C Standard Temperature range
-40°C up to +85°C Industrial Temperature range
MTBF >3 000 000 hours (Telcordia, 25°C)
Life cycle (TBW) 15,46TB (8GB) up to 123,73TB (64GB) written Data (JEDEC 218)
Warranty 5 years
Order information InnoDisk SATADOM-SL 3IE3
auf Anforderung
Specification InnoDisk SATADOM-SL 3ME3
Dimension 32.9 x 29,5 x 8mm
Solid State MLC NAND Flash
no moving parts
Interface Serial ATA III
Design vertical, low-profile, straight connector
Connector Standard 7-pin SATA
Transfer Modes SATA I (1,5Gb/s) ,SATA II (3,0Gb/s) and SATA III (6Gb/s) support
Data transfer rate up to 210 MB/s Sustained Read and
80MB/s Sustained Write (depending on capacity)
I/O Performance up to 7100 IOPS Random Read and
up to 13300 IOPS Randow Write (4KB)
Software no driver software are required
Additional configuration Temperature sensor (only Industial Temp.)
Conformal Coating (optional)
Flash Management ECC,
Wear Leveling,
Bad Block Management
Garbage Collection,
S.M.A.R.T Support
Power Management
iData Guard
ATA Security Support
Voltage 5VDC +/- 5%
additional cable or VCC via Pin 7 possible
Power consumption max. 125mA (Sustained Write)
Capacity 8, 16, 32, 64, 128GB
Temperature range (operating) 0°C up to 70°C Standard Temperature range
-40°C up to +85°C Industrial Temperature range
MTBF >3 000 000 hours (Telcordia, 25°C)
Life cycle (TBW) 2,32TB (8GB) up to 37,12TB (128GB) written data (Sequential)
Warranty 2 years
Order information InnoDisk SATADOM-SL 3ME3
on request
Specification InnoDisk SATADOM-SV 3SE
Dimension 20.9 x 39.5 x 7.9mm
Solid State SLC NAND Flash
no moving parts
Interface Serial ATA III
Design vertical, high-profile, straight connector
Connector Standard 7-pin SATA
Transfer Modes SATA I (1,5Gb/s) ,SATA II (3,0Gb/s) and SATA III (6Gb/s) support
Data transfer rate up to 300MB/s Sustained Read and
130MB/s Sustained Write (depending on capacity)
I/O Performance no information
Software no driver software are required
Additional configuration Write protection switch
Temperature sensor (only Industial Temp.)
Conformal Coating (optional)
Flash Management ECC,
Wear Leveling,
Bad Block Management
Garbage Collection,
S.M.A.R.T Support
Power Management
iData Guard
ATA Security Support
Data integrity 10 years
Voltage 5VDC +/- 5%
additional cable or VCC via Pin 7 possible
Power consumption max. 130mA (Sustained Write)
Capacity 1, 2, 4, 8, 16, 32GB
Temperature range (operating) 0°C up to 70°C Standard Temperature range
-40°C up to +85°C Industrial Temperature range
MTBF >3 000 000 hours (Telcordia, 25°C)
Life cycle (TBW) 54TB (1GB) up to 1728TB (32GB) written data (Sequential)
Warranty 5 years
Order information InnoDisk SATADOM-SV 3SE
on request
Specification InnoDisk SATADOM-SV 3IE3
Dimension 18,0 x 39,2 x 7,56mm
Solid State Enhanced MLC (iSLC) NAND Flash
no moving parts
Interface Serial ATA III
Design horizontal, angled connector
Connector Standard 7-pin SATA
Transfer Modes SATA I (1,5Gb/s) ,SATA II (3,0Gb/s) and SATA III (6Gb/s) support
Data transfer rate up to 240MB/s Sustained Read and
160MB/s Sustained Write (depends on capacity)
I/O Performance up to 9600 IOPS Random Read and
up to 24800 IOPS Randow Write (4KB)
Software no driver software are required
Additional configuration Temperature sensor (only Industrial Temp.)
Conformal Coating (optional)
Flash Management ECC,
Wear Leveling,
Bad Block Management
Garbage Collection,
S.M.A.R.T Support
Power Management
iData Guard
ATA Security Support
Data integrity 10 years
Voltage 5VDC +/- 5%
additional cable or VCC via Pin 7 or via Pin8 possible
Power consumption max. 227mA (Sustained Write)
Capacities 8, 16, 32, 64GB
Temperature range (operating) 0°C up to 70°C Standard Temperature range
-40°C up to +85°C Industrial Temperature range
MTBF >3 000 000 hours (Telcordia, 25°C)
Life cycle (TBW) 15,46TB (8GB) up to 123,73TB (64GB) written Data (JEDEC 218)
Warranty 5 years
Order information InnoDisk SATADOM-SV 3IE3
on request
Specification InnoDisk SATADOM-SV 3ME3
Dimension 20.9 x 39.5 x 7.9mm
Solid Stat MLC NAND Flash
no moving parts
Interface Serial ATA III
Design vertical, high-profile, straight connector
Connector Standard 7-pin SATA
Transfer Modes SATA I (1,5Gb/s) ,SATA II (3,0Gb/s) and SATA III (6Gb/s) support
Data transfer rate up to 210MB/s Sustained Read and
80MB/s Sustained Write (depending on capacity)
I/O Performance up to 7100 IOPS Random Read and
up to 13300 IOPS Randow Write (4KB)
Software no driver software are required
Additional configuration Temperature sensor (only Industial Temp.)
Conformal Coating (optional)
Flash Management ECC,
Wear Leveling,
Bad Block Management
Garbage Collection,
S.M.A.R.T Support
Power Management
iData Guard
ATA Security Support
Voltage 5VDC +/- 5%
additional cable or VCC via Pin 7 or via Pin 8 possible
Power consumption max. 370mA (Sustained Write)
Capacity 8, 16, 32, 64, 128GB
Temperature range (operating) 0°C up to 70°C Standard Temperature range
-40°C up to +85°C Industrial Temperature range
MTBF >3 000 000 hours (Telcordia, 25°C)
Life cycle (TBW) 2,32TB (8GB) up to 37,12TB (128GB) written data (JEDEC 218)
Warranty 2 years
Order information InnoDisk SATADOM-SV 3ME3 (examples)
on request
Inhalt 9
Inhalt 10
Inhalt 11
Inhalt 12

(Technische Änderungen vorbehalten)