Our Products
InnoDisk ServerDOM

The ServerDOM is a powerful and compact Flash storage device with economical power consumption which is particularly suitable for usage in Enterprise Server.
Thanks to an extremely small size it can be pluged directly on the onboard SATA socket of modern Enterprise Server and is therefore an ideal boot device which leaves ample space for data storage media.
The ServerDOM is RAID capable and is suitable for fail-over-conceptions
The power supply is possible by an external cable or direct via the SATA connector (pin 8). Alternatively there is an option for power supply via pin 7 of the SATA connector.

The ServerDOM is available with various designs and Flash technologies. Capacities from 2GB up to 64GB (depending on the type).

  • 2, 4, 8, 16GB SLC NAND Flash memory or
  • 8, 16, 32GB Enhanced MLC (iSLC) NAND Flash memory or
  • 8, 16, 32, 64GB MLC NAND Flash memory
  • no moving parts
  • Patented Power Pin Design
  • extremely compact design for Blade and 1HE Server
  • Standard SATA III Interface
  • various designs
  • ECC Defect Management
  • Wear Leveling
  • Garbage Collection
  • S.M.A.R.T. Support
  • IPMI optional
  • shock and vibration resistant
  • low power consumption
  • InnoDisk
    ServerDOM-V 3SE
  • InnoDisk
    ServerDOM-H 3SE
  • InnoDisk
    ServerDOM-L 3SE
  • InnoDisk
    ServerDOM-V 3IE
  • InnoDisk
    ServerDOM-H 3IE
  • InnoDisk
    ServerDOM-L 3IE
  • InnoDisk
    ServerDOM-V 3ME
  • InnoDisk
    ServerDOM-H 3ME
  • InnoDisk
    ServerDOM-L 3ME
Specification InnoDisk ServerDOM-V 3SE
Dimension 20,2mm x 30,7mm x 8,7mm (including connector)
Solid State SLC NAND Flash
no moving parts
Interface Serial ATA III
Design vertical, straight connector
Connector 7-pin SATA respectively 8-pin SATA
Transfer Modes SATA I (1,5Gb/s) ,SATA II (3,0Gb/s) and SATA III (6Gb/s) support
Data transfer rate up to 450MB/s Sustained Read and
200MB/s Sustained Write (depending on capacity)
I/O Performance not specified
Software no driver software required
Additional configuration IPMI configuration (optional)
Conformal Coating (optional)
Flash Management ECC,
Wear Leveling,
Bad Block Management
Garbage Collection,
S.M.A.R.T Support
Power Management
ATA Security Support
Data integrity 10 years
Voltage 5VDC +/- 5%
additionally cable or VCC via Pin 8 or Pin 7 possible
Power consumption max.2W (Sustained Write)
Capacity 2, 4, 8, 16GB
Temperature range (operating) 0°C up to 70°C (Standard Temperature range)
-40°C up to 85°C (Industrial Temperature range)
MTBF >3 000 000 hours (Telcordia, 25°C)
Durability (TBW) 108TB (2GB) up to 864TB (16GB) written Data (Sequential Write)
Warranty 5 years
Order information on request
   
Other variations/capacities on request  
Specification InnoDisk ServerDOM-H 3SE
Dimension 25mm x 21,8mm x 13,3mm (including connector)
Solid State SLC NAND Flash
no moving parts
Interface Serial ATA III
Design horizontally, angled connector
Connector 7-pin SATA respectively 8-pin SATA
Transfer Modes SATA I (1,5Gb/s) ,SATA II (3,0Gb/s) and SATA III (6Gb/s) support
Data transfer rate up to 450MB/s Sustained Read and
200MB/s Sustained Write (depending on capacity)
I/O Performance not specified
Software no driver software required
Additional configuration IPMI configuration (optional)
Conformal Coating (optional)
Flash Management ECC,
Wear Leveling,
Bad Block Management
Garbage Collection,
S.M.A.R.T Support
Power Management
ATA Security Support
Data integrity 10 years
Voltage 5VDC +/- 5%
additionally cable or VCC via Pin 8 or Pin 7 possible
Power consumption max.2W (Sustained Write)
Capacity 2, 4, 8, 16GB
Temperature range (operating) 0°C up to 70°C (Standard Temperature range)
-40°C up to 85°C (Industrial Temperature range)
MTBF >3 000 000 hours (Telcordia, 25°C)
Durability (TBW) 108TB (2GB) up to 864TB (16GB) written Data (Sequential Write)
Warranty 5 years
Order information on request
   
Other variations/capacities on request  
Specification InnoDisk ServerDOM-L 3SE
Dimension 25mm x 29,4mm x 7,7mm (including connector)
Solid State SLC NAND Flash
no moving parts
Interface Serial ATA III
Design vertical, low profile, straight connector
Connector 7-pin SATA respectively 8-pin SATA
Transfer Modes SATA I (1,5Gb/s) ,SATA II (3,0Gb/s) and SATA III (6Gb/s) support
Data transfer rate up to 450MB/s Sustained Read and
200MB/s Sustained Write (depending on capacity)
I/O Performance not specified
Software no driver software required
Additional configuration IPMI configuration (optional)
Conformal Coating (optional)
Flash Management ECC,
Wear Leveling,
Bad Block Management
Garbage Collection,
S.M.A.R.T Support
Power Management
ATA Security Support
Data integrity 10 years
Voltage 5VDC +/- 5%
additionally cable or VCC via Pin 8 or Pin 7 possible
Power consumption max.2W (Sustained Write)
Capacity 2, 4, 8, 16GB
Temperature range (operating) 0°C upt to 70°C (Standard Temperature range)
-40°C upt to 85°C (Industrial Temperature range)
MTBF >3 000 000 hours (Telcordia, 25°C)
Durability (TBW) 108TB (2GB) up to 864TB (16GB) written Data (Sequential Write)
Warranty 5 years
Order information on request
   
Other variations/capacities on request  
Specification InnoDisk ServerDOM-V 3IE
Dimension 20,2mm x 30,7mm x 8,7mm (including connector)
Solid State iSLC (enhanced MLC) NAND Flash
no moving parts
Interface Serial ATA III
Design vertical, straight connector
Connector 7-pin SATA
Transfer Modes SATA I (1,5Gb/s) ,SATA II (3,0Gb/s) and SATA III (6Gb/s) support
Data transfer rate up to 480MB/s Sustained Read and
270MB/s Sustained Write (depending on capacity)
I/O Performance not specified
Software no driver software required
Additional configuration IPMI configuration (optional)
Conformal Coating (optional)
Flash Management ECC,
Wear Leveling,
Bad Block Management
Garbage Collection,
S.M.A.R.T Support
Power Management
ATA Security Support
Data integrity 10 years
Voltage 5VDC +/- 5%
additionally cable or VCC via Pin 7 possible
Power consumption max.2,8W (Sustained Write)
Capacity 8, 16, 32GB
Temperature range (operating) 0°C upt to 70°C (Standard Temperature range)
MTBF >3 000 000 hours (Telcordia, 25°C)
Durability (TBW) 144TB (8GB) up to 576TB (32GB) written Data (Sequential Write)
Warranty 5 years
Order information on request
   
Other variations/capacities on request  
Specification InnoDisk ServerDOM-H 3IE
Dimension 25mm x 21,8mm x 13,3mm (including connector)
Solid State iSLC (enhanced MLC) NAND Flash
no moving parts
Interface Serial ATA III
Design horizontally, angled connector
Connector 8-pin SATA
Transfer Modes SATA I (1,5Gb/s) ,SATA II (3,0Gb/s) and SATA III (6Gb/s) support
Data transfer rate up to 480MB/s Sustained Read and
270MB/s Sustained Write (depending on capacity)
I/O Performance not specified
Software no driver software required
Additional configuration IPMI configuration (optional)
Conformal Coating (optional)
Flash Management ECC,
Wear Leveling,
Bad Block Management
Garbage Collection,
S.M.A.R.T Support
Power Management
ATA Security Support
Data integrity 10 years
Voltage 5VDC +/- 5%
additionally cable or VCC via Pin 8 or Pin 7 possible
Power consumption max.2,8W (Sustained Write)
Capacity 8, 16, 32GB
Temperature range (operating) 0°C upt to 70°C (Standard Temperature range)
MTBF >3 000 000 hours (Telcordia, 25°C)
Durability (TBW) 144TB (8GB) up to 576TB (32GB) written Data (Sequential Write)
Warranty 5 years
Order information on request
   
Other variations/capacities on request  
Specification InnoDisk ServerDOM-L 3IE
Dimension 25mm x 29,4mm x 7,7mm (including connector)
Solid State iSLC (enhanced MLC) NAND Flash
no moving parts
Interface Serial ATA III
Design vertical, low profile, straight connector
Connector 7-pin SATA respectively 8-pin SATA
Transfer Modes SATA I (1,5Gb/s) ,SATA II (3,0Gb/s) and SATA III (6Gb/s) support
Data transfer rate up to 480MB/s Sustained Read and
270MB/s Sustained Write (depending on capacity)
I/O Performance not specified
Software no driver software required
Additional configuration IPMI configuration (optional)
Conformal Coating (optional)
Flash Management ECC,
Wear Leveling,
Bad Block Management
Garbage Collection,
S.M.A.R.T Support
Power Management
ATA Security Support
Data integrity 10 years
Voltage 5VDC +/- 5%
additionally cable or VCC via Pin 8 or Pin 7 possible
Power consumption max.2,8W (Sustained Write)
Capacity 8, 16, 32GB
Temperature range (operating) 0°C upt to 70°C (Standard Temperature range)
MTBF >3 000 000 hours (Telcordia, 25°C)
Durability (TBW) 144TB (8GB) up to 576TB (32GB) written Data (Sequential Write)
Warranty 5 years
Order information on request
   
Other variations/capacities on request  
Specification InnoDisk ServerDOM-V 3ME
Dimension 20,2mm x 30,7mm x 8,7mm (including connector)
Solid State MLC NAND Flash
no moving parts
Interface Serial ATA III
Design vertical, straight connector
Connector 7-pin SATA
Transfer Modes SATA I (1,5Gb/s) ,SATA II (3,0Gb/s) and SATA III (6Gb/s) support
Data transfer rate up to 480MB/s Sustained Read and
160MB/s Sustained Write (depending on capacity)
I/O Performance not specified
Software no driver software required
Additional configuration IPMI configuration (optional)
Conformal Coating (optional)
Flash Management ECC,
Wear Leveling,
Bad Block Management
Garbage Collection,
S.M.A.R.T Support
Power Management
ATA Security Support
Data integrity not speciefied
Voltage 5VDC +/- 5%
additionally cable or VCC via Pin 7 possible
Power consumption max.2,8W (Sustained Write)
Capacity 8, 16, 32, 64GB
Temperature range (operating) 0°C up to 70°C (Standard Temperature range)
MTBF >3 000 000 hours (Telcordia, 25°C)
Durability (TBW) 21,6TB (8GB) up to 172,8TB (64GB) written Data (Sequential Write)
Warranty 2 years
Order information on request
   
Other variations/capacities on request  
Specification InnoDisk ServerDOM-H 3ME
Dimension 25mm x 21,8mm x 13,3mm (including connector)
Solid State MLC NAND Flash
no moving parts
Interface Serial ATA III
Design horizontally, angled connector
Connector 8-pin SATA
Transfer Modes SATA I (1,5Gb/s) ,SATA II (3,0Gb/s) and SATA III (6Gb/s) support
Data transfer rate up to 480MB/s Sustained Read and
160MB/s Sustained Write (depending on capacity)
I/O Performance not specified
Software no driver software required
Additional configuration IPMI configuration (optional)
Conformal Coating (optional)
Flash Management ECC,
Wear Leveling,
Bad Block Management
Garbage Collection,
S.M.A.R.T Support
Power Management
ATA Security Support
Data integrity not specified
Voltage 5VDC +/- 5%
additionally cable or VCC via Pin 8 or Pin 7 possible
Power consumption max.2,8W (Sustained Write)
Capacity 8, 16, 32 , 64GB
Temperature range (operating) 0°C upt to 70°C (Standard Temperature range)
MTBF >3 000 000 hours (Telcordia, 25°C)
Durability (TBW) 21,6TB (8GB) up to 172,8TB (64GB) written Data (Sequential Write)
Warranty 2 years
Order information on request
   
Other variations/capacities on request  
Specification InnoDisk ServerDOM-L 3ME
Dimension 25mm x 29,4mm x 7,7mm (including connector)
Solid State MLC NAND Flash
no moving parts
Interface Serial ATA III
Design vertical, low profile, straight connector
Connector 7-pin SATA respectively 8-pin SATA
Transfer Modes SATA I (1,5Gb/s) ,SATA II (3,0Gb/s) and SATA III (6Gb/s) support
Data transfer rate up to 480MB/s Sustained Read and
160MB/s Sustained Write (depending on capacity)
I/O Performance not specified
Software no driver software required
Additional configuration IPMI configuration (optional)
Conformal Coating (optional)
Flash Management ECC,
Wear Leveling,
Bad Block Management
Garbage Collection,
S.M.A.R.T Support
Power Management
ATA Security Support
Data integrity not specified
Voltage 5VDC +/- 5%
additionally cable or VCC via Pin 8 or Pin 7 possible
Power consumption max.2,8W (Sustained Write)
Capacity 8, 16, 32, 64GB
Temperature range (operating) 0°C up to 70°C (Standard Temperature range)
MTBF >3 000 000 hours (Telcordia, 25°C)
Durability (TBW) 21,6TB (8GB) up to 172,8TB (64GB) written Data (Sequential Write)
Warranty 2 years
Order information on request
   
Other variations/capacities on request  

(Technical details are subject to change without prior notice)