The InnoDisk SATA 3SE is a SLC based 2,5" Format Flashdrive for a broad range of applications. It offers excellent performance as well as reliability and data integrity which is a precondition in an embedded Environment.
Especially for I/O intensive applications like data bases the SATA 3SE with a DRAM Puffer, optimized for Random Write access, is available.
The 2.5" InnoDisk SATA 3SE is available with capacities starting at 4 up to 512GB with SLC Flash Technology.
Especially for I/O intensive applications like data bases the SATA 3SE with a DRAM Puffer, optimized for Random Write access, is available.
The 2.5" InnoDisk SATA 3SE is available with capacities starting at 4 up to 512GB with SLC Flash Technology.
InnoDisk SATA 3SE Flash Drive

- 4, 8, 16, 32, 64, 128, 256 and 512GB SLC NAND Flash memory
- No moving parts
- Standard SATA III Interface
- Standard Harddisk Format
- ECC Defect Management
- Wear Leveling
- S.M.A.R.T Monitoring
- Shock and vibration resistant
- Low power consumption
- No additional driver software are required
- Extended Temperature range optional
Form Factor/Dimension | 2,5" |
Width: | 69,85 mm |
Depth: | 100,10 mm |
Height: | 9,3 mm |
Solid State | SLC NAND Flash (Industrial standard) no moving parts |
Interface | SATA III 6.0G |
Mounting | Hard disk Industrial standard, all orientation |
Connector | Standard 7-pin Signal Segment and 15-pin Power Segment |
Transfer Modes | SATA I, SATA II and SATA III support |
Data transfer rate | up to 490MB/s Sustained Read and 430MB/s Sustained Write (3SE) up to 470MB/s Sustained Read and 340MB/s Sustained Write (3SE-P) |
I/O Performance | tbd |
Software | No additional driver software are required |
Sectors | Standard 512 Byte Sectors |
Additional configuration | Temperature sensor Conformal Coating (optional) iCell protection facing voltage dips (3SE-P, optional) |
Flash Management | ECC, Static Wear Leveling, Bad Block Management S.M.A.R.T. Monitoring Power Cycling Management DRAM Puffer (3SE-P) TRIM (3SE-P) |
Data integrity | 10 years |
Voltage | 5VCC +/- 5% |
Power consumption | max. 2,75 W (3SE) 3,15W (3SE-P) |
Capacity | 4, 8, 16, 32, 64, 128, 256, 512GB (3SE) 8, 16, 32, 64, 128, 256GB (3SE-P) (other capacities on request) |
Temperature range (operating) | 0°C up to 70°C Standard Temperature range -40°C up to +85°C Industrial Temperature range |
MTBF | >3 000 000 hours (Telcordia 25°C) |
Life time (TBW) | 216TB (4GB) up to 27648TB (512GB) written data (3SE) 432TB (8GB) upt to 13824TB (256GB) written data (3SE-P) (Sequential Write) |
Warranty | 5 years |
On request |
Please ask for additional products
Technical details are subject to change without prior notice