APdate! card solutions

The InnoDisk SATA 3ME3 is a MLC based 2,5" Flashdrive for price-sensitive applications in an embedeed environment., which needs a very good I/O performance. The concept with no DRAM buffer memory ensures the data integrity and improves - in correspondence with a page oriented firmware - the performance.
The 2,5" InnoDisk SATA 3ME3 is available with capacites starting from 8 to 512GB with MLC Flash Technology.

InnoDisk SATA 3ME3 Flash Storage Drive

• 8, 16, 32, 64, 128, 256 und 512GB MLC NAND Flash memory
• Design without DRAM buffer
• No moving parts
• Standard SATA III Interface
• Standard Harddisk Format
• ECC Defect Management
• Wear Leveling
• S.M.A.R.T Monitoring
• Shock and vibrations resistant
• Low power consumption
• No additional driver software required
• Extendet temperature range optional

Specification

Form Factor/Dimension	2,5"
Width:	69,85 mm
Depth:	100 mm
Hight:	7mm/9mm
Solid State	MLC NAND Flash (Industrial standard) no moving parts
Interface	SATA III 6.0G
Mounting	Harddisk Industrial standard, all orientation
Connector	Standard 7-pin Signal Segment and 15-pin Power Segment
Transfer Modes	SATA I, SATA II and SATA III support
Data transfer rate	up to 350MB/s Sustained Read and 130MB/s Sustained Write (depends on capacity)
I/O Performance	up to 10600 IOPS (Random Read) and 25800 IOPS (Random Write) (depends on capacity)
Software	no driver software are required
Sectors	Standard 512 Byte sectors
Additional configuration	Temperature sensor Conformal Coating (optional)
Flash Management	ECC, Static Wear Leveling, Bad Block Management NCQ TRIM Garbage Collection S.M.A.R.T. Monitoring Power Cycling Management
Voltage	5VCC +/- 5%
Power consumption	max.1,55W
Capacities	8, 16, 32, 64, 128, 256, 512GB (other capacities on request)
Temperature range(operating)	0°C up to 70°C Standard Temperature range -40°C up to +85°C Industrial Temperature range
MTBF	>3 000 000 hours(Telcordia 25°C)
Lifetime (TBW)	no information
Warranty	2 years

Order informationen

On request