Our Products
The InnoDisk ATA 1SEFlash Drive is a robust and reliable IDE storage device with 2,5" format and a good performance. Designed as a hard disk alternative for applications with high demands on data integrity, availability and endurance in an embedded environment.
The SSD is equipped with high standard MLC Flash memory and all state of the art Flash Management functions. The InnoDisk ATA 1ME meets the ATA 7 standard and supports UDMA and PIO Transfer Modes.
The InnoDisk ATA 1SE is available with capacities starting at 4 up to 256GB as well as a MLC-based model
InnoDisk ATA 1SE Flash Drive
  • 4 up to 256 GB SLC NAND Flash memory
  • No moving parts
  • Up to 90 MB/s data transfer
  • Standard IDE Interface
  • Standard Harddisk format
  • PIO and UDMA Support
  • ECC Defect Management
  • Static Wear Leveling
  • S.M.A.R.T.
  • Shock and vibration resistand
  • Low power consumption
  • No additional driver software are required
Specification
Form Factor/Dimension 2,5 "
Width: 69,85 mm
Depth: 99,85 mm
Height: 10,7 mm
Solid State SLC NAND Flash (Industrial standard) no moving parts
Interface IDE/ATA7
Mounting Harddisk Industrial standard, all orientation
Conector Standard IDE 44-pin, 2mm
Transfer Modes PIO Mode 0-4 and UDMA Mode 0-5 support
Data transfer rate up to 90 MB/s sustained write and 90 MB/s sustained read
Software no driver software are required
Sectors Standard 512 Byte sectors
Flash Management ECC
StaticWear Leveling
Bad Block Management
NCQ
Garbage Collection
S.M.A.R.T. Monitoring
Power Management
Data integrity 10 years
Voltage 5VCC +/- 5%
Power consumption max. 1,8 W (sustained write)
Capacity 4, 8, 16, 32, 64, 128, 256GB (other capacities on request)
Concussion 1500G / 0,5s shock (neutral)
15G (7-2000Hz) vibration
Temperature range (operating)) 0°C up to 70°C (Standard Termperature range)
-40°C up to 85°C (Industrial Termperature range)
MTBF >3 000 000 hours (Telcordia 25°C)
Life time 360TB (4GB ) up to 23040TB (256GB) sequential write
Warranty 5 years
Order informationen
On request
Other products on request

(Technical details are subject to change without prior notice)